 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) STTH5L06D/B/FP TURBO 2 ULTRAFAST HIGH VOLTAGE RECTIFIER MAIN PRODUCT CHARACTERISTICS IF(AV) VRRM IR (max) Tj (max) VF (max) trr (max) FEATURES AND BENEFITS s s 5A 600 V 125 A 175 C 1.05 V 95 ns K A K A TO-220AC STTH5L06D TO-220FPAC STTH5L06FP s s Ultrafast switching Low reverse recovery current Reduces switching & conduction losses Low thermal resistance K DESCRIPTION The STTH5L06D/B/FP, which is using ST Turbo 2 600V technology, is specially suited as boost diode in discontinuous or critical mode power factor corrections. The device, available in TO-220AC, TO-220FPAC and DPAK, is also intended for use as a free wheeling diode in power supplies and other power switching applications. ABSOLUTE RATINGS (limiting values) Symbol VRRM IF(RMS) IF(AV) IFSM RMS forward current Average forward current Surge non repetitive forward current TO-220AC / DPAK TO-220FPAC tp = 10 ms Sinusoidal tp = 10 ms Sinusoidal Parameter Repetitive peak reverse voltage A NC DPAK STTH5L06B Value 600 TO-220AC/TO-220FPAC DPAK Tc = 150C =0.5 Tc = 135C =0.5 TO-220AC/TO-220FPAC DPAK 90 60 - 65 + 175 + 175 20 10 5 Unit V A A A Tstg Tj Storage temperature range Maximum operating junction temperature C C November 2002 - Ed: 4B 1/7 STTH5L06D/B/FP THERMAL PARAMETERS Symbol Rth(j-c) Junction to case Parameter TO-220AC / DPAK TO-220FPAC Maximum 3.5 6.0 Unit C/W STATIC ELECTRICAL CHARACTERISTICS Symbol IR Parameter Reverse leakage current Forward voltage drop Tests conditions VR = 600V Tj = 25C Tj = 150C IF = 5 A Tj = 25C Tj = 150C To evaluate the maximum conduction losses use the following equation : P = 0.89 x IF(AV) + 0.033 IF2(RMS) 0.85 10 Min. Typ. Max. 5 125 1.3 1.05 V Unit A VF DYNAMIC ELECTRICAL CHARACTERISTICS Symbol trr tfr VFP Parameter Reverse recovery time Forward recovery time Forward recovery time Tests conditions IF = 1 A dIF/dt = - 50 A/s VR = 30V IF = 5 A dIF/dt = 100 A/s VFR = 1.1 x VFmax IF = 5 A dIF/dt = 100 A/s Tj = 25C Tj = 25C Tj = 25C Min. Typ. 65 Max. 95 150 7 Unit ns ns V Fig. 1: Conduction losses versus average current. P(W) 7 6 5 4 3 = 0.05 = 0.1 Fig. 2: Forward voltage drop versus forward current. IFM(A) 100.0 Tj=150C (maximum values) = 0.2 = 0.5 =1 10.0 Tj=150C (typical values) Tj=25C (maximum values) 1.0 2 T 1 IF(AV)(A) 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 =tp/T 5.0 5.5 tp 0.1 6.0 VFM(V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 2/7 STTH5L06D/B/FP Fig. 3-1: Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC, DPAK). Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 Single pulse = 0.2 = 0.1 = 0.5 Fig. 3-2: Relative variation of thermal impedance junction to case versus pulse duration (TO-220FPAC). Zth(j-c)/Rth(j-c) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 = 0.2 = 0.1 = 0.5 T 0.2 0.1 T 0.1 0.0 1.E-03 1.E-02 tp(s) 1.E-01 =tp/T tp 0.0 1.E+00 Single pulse tp(s) 1.E-02 1.E-01 =tp/T 1.E+00 tp 1.E+01 1.E-03 Fig. 4: Peak reverse recovery current versus dIF/dt (90% confidence). IRM(A) 8 VR=400V Tj=125C Fig. 5: Reverse recovery time versus dIF/dt (90% confidence). trr(ns) 1000 900 VR=400V Tj=125C 7 IF=2 x IF(AV) 800 700 600 500 IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) 6 IF=IF(AV) 5 4 IF=0.25 x IF(AV) IF=0.5 x IF(AV) 3 2 400 300 200 1 0 0 10 20 30 dIF/dt(A/s) 40 50 60 70 80 90 100 100 0 0 10 20 30 dIF/dt(A/s) 40 50 60 70 80 90 100 Fig. 6: Reverse recovery charges versus dIF/dt (90% confidence). Qrr(nC) 500 450 400 350 300 250 200 150 100 50 0 0 10 20 30 40 50 60 70 80 90 100 IF=0.5 x IF(AV) VR=400V Tj=125C IF=2 x IF(AV) Fig. 7: Softness factor versus dIF/dt (typical values). S factor 2.4 2.2 2.0 IF=IF(AV) VR=400V Tj=125C IF=IF(AV) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 dIF/dt(A/s) 0.4 0.2 0 10 20 30 dIF/dt(A/s) 40 50 60 70 80 90 100 3/7 STTH5L06D/B/FP Fig. 8: Relative variations of dynamic parameters versus junction temperature. Fig. 9: Transient peak forward voltage versus dIF/dt (90% confidence). VFP(V) 1.25 S factor 10 9 IF=IF(AV) Tj=125C 1.00 IRM 8 7 0.75 QRR 6 5 0.50 4 3 0.25 Tj(C) 0.00 25 50 75 IF=IF(AV) VR=400V Reference: Tj=125C 2 1 125 dIF/dt(A/s) 0 20 40 60 80 100 120 140 160 180 200 100 0 Fig. 10: Forward recovery time versus dIF/dt (90% confidence). tfr(ns) 200 180 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 180 200 IF=IF(AV) VFR=1.1 x VF max. Tj=125C Fig. 11: Junction capacitance versus reverse voltage applied (typical values). C(pF) 100 F=1MHz VOSC=30mV Tj=25C 10 dIF/dt(A/s) 1 1 10 VR(V) 100 1000 Fig. 12: Thermal resistance junction to ambient versus copper surface under tab (epoxy printed circuit board FR4, copper thickness: 35m) (DPAK). Rth(j-a)(C/W) 80 70 60 50 40 30 20 10 0 0 2 4 6 8 10 12 14 16 18 20 S(Cu)(cm) 4/7 STTH5L06D/B/FP PACKAGE MECHANICAL DATA DPAK DIMENSIONS REF. A A1 A2 B B2 C C2 D E G H L2 L4 V2 Millimeters Min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.60 0 Max 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 1.00 8 Inches Min. 0.086 0.035 0.001 0.025 0.204 0.017 0.018 0.236 0.251 0.173 0.368 0.023 0 Max. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 0.259 0.181 0.397 0.039 8 0.80 typ. 0.031 typ. FOOTPRINT 6.7 6.7 3 3 1.6 2.3 2.3 1.6 5/7 STTH5L06D/B/FP PACKAGE MECHANICAL DATA TO-220FPAC REF. Min. A H B DIMENSIONS Millimeters Max. 4.6 2.7 2.75 0.70 1 1.70 5.20 2.7 10.4 30.6 10.6 3.6 16.4 9.30 3.20 Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.195 0.094 0.393 1.126 0.386 0.114 0.626 0.354 0.118 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.205 0.106 0.409 1.205 0.417 0.142 0.646 0.366 0.126 A B D E F F1 L7 4.4 2.5 2.5 0.45 0.75 1.15 4.95 2.4 10 28.6 9.8 2.9 15.9 9.00 3.00 Dia L6 L2 L3 L5 D F1 L4 G G1 H L2 L3 L4 L5 L6 L7 Dia. 16 Typ. 0.63 Typ. F G1 G E 6/7 STTH5L06D/B/FP PACKAGE MECHANICAL DATA TO-220AC DIMENSIONS REF. A H B Millimeters Min. Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40 14.00 2.95 15.75 6.60 3.93 3.85 4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00 13.00 2.65 15.25 6.20 3.50 3.75 Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 0.511 0.104 0.600 0.244 0.137 0.147 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409 0.551 0.116 0.620 0.259 0.154 0.151 A C D E F F1 L7 Dia L6 L2 L3 L5 D F1 L4 G H2 L2 L4 L5 L6 L7 L9 M Diam. I 16.40 typ. 0.645 typ. F G1 G E 2.6 typ. 0.102 typ. Ordering code STTH5L06D STTH5L06B STTH5L06B-TR STTH5L06FP s s Marking STTH5L06D STTH5L06B STTH5L06B STTH5L06FP Package TO-220AC DPAK DPAK TO-220PFAC Weight 1.9 g 0.3 g 0.3 g 1.7 g Base qty 50 75 2500 50 Delivery mode Tube Tube Tape & reel Tube s Epoxy meets UL 94,V0 Recommended torque value (TO-220AC): 0.55 Nm Maximum torque value (TO-220AC / TO-220FPAC): 0.7 Nm Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7 |
Price & Availability of STTH5L06FP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |